• Increase font size
  • Decrease font size
  • Default font size
  • red color
Products
Network CCTV PDF Print E-mail
Sunday, 10 May 2009 15:05



 
Automatic Industrial Voltage Stabilizer PDF Print E-mail
Sunday, 10 May 2009 15:05
Introduction
PowerCom INDUSTRIAL VOLTAGE STABILIZER (IVS) Is designed with solid state electronic controls and protecting circuits. The regulation is performed automatically causing a step less continuous operation with high regulation and fast response time. IVS is the suitable protective device for all industrial equipments. It not only provides with stable and reliable power but also offers substantial benefits in performance, reliability and maintenance cost.
Automatic Industrial Voltage StabilizerIndustries
Cement Factory
Textile Machineries
Readymate Garments
Spinning mills
Weaving Machines
Knitting Machines
Dyeing & Finishing
Sophisticated Power Protection For Industries
Embroidery
Label Machines
Pharmaceutical Instruments
Hospitals & Medical Equipments
Laboratory Equipments
Scientific Equipments
Computer Systems
Color Lab Equipments
Tele Communication Equipments
Elevators & Escalators
Defence Equipments
Central Air Conditioning PlantAutomatic Industrial Voltage Stabilizer
Injection Moulding Machines



Features & Characteristics

» Fully Automatic Electronic Circuitry
» Servo Motor Controlled
» Wide Range Regulator
» Overload / Short Circuit Protection
» High And Low Voltage Protection With Audioable Alarm
» Auto / Manual Regulation Option (60KVA And Above)
» Three Phase Balance Facilities System ( Individual Phase Control )
» Benford Type Amorphous Core For Air Forced Cooling System
» Phase Sequence Protection ( 60KVA And Above) With Audioable Alarm
Built-In (Adjustable) Delay Timer
Auto Trip And Reset System
Voltage Indicator Meter
Current Indicator Meter
Fast Response Time Of Regulator
Internal Manual By-Pass System ( Optional)
Phase Missing Protection
Rust Proof Plastic Paint Steel Cabinet
Technocal Specifications
 
Automatic Battery Charger/Rectifier PDF Print E-mail
Sunday, 10 May 2009 15:05
Introduction
PowerCom rectifiers are designed by emphasizing on compact size, intelligent features and reliability. Rectifiers are designed failsafe, self-protected as well as protecting the system to which they are connected. It is ensured against overload by current limitation and provided with surge suppressores.
Automatic Battery Charger/Rectifier



PROVEN DESIGN
RECTIFIER FOR PRECISION USE WITH
TELECOM, RAILWAY AND CONTINUOUS
BATTERY CHARGING EQUIPMENT.




Applications
» Unattended DC stand-by systems where the battery is used to supply DC power
when the main fails. Battery is kept in float charge condition continuously.

» On-line DC system, where the rectifier is used to charge the battery as well as
supplying power to the load.

» Telecommunication system in which the charger is used as a Battery Eliminator.
 
Features
» Constant voltage charging profile and ripple free regulated output voltage.
» Short circut fail-safe design by automatic current limiting.
» Reverse polarity protection.
» Semiconductor-dropper is used to compensete high voltage when charger is connected to load in parallel.
» Complete situation monitoring options.
» Esthetically looks with heavy steel enclosure .
 
ELECTRICAL PARAMETERS
INPUT SPECIFICATION OUTPUT SPECIFICATION
INPUT VOLTAGE RANGE :
110VAC/240VAC, 1?
190VAC 415VAC, 3?
INPUT VOLTAGE VARIATION :
+- 10%/+- 15%/+- 20%
FREQUENCY : 50HZ+- 5%
LINE REGULATION :
+- 1% FROM NO LOAD TO FULL LOAD
EFFICIENCY : 85%
OUTPUT VOLT :
6V, 12V, 24V, 36V, 48V,
60V 110V, 20V(Continuous)
OUTPUT CURRENT : 1-500 AMP DC (As per req. )
RIPPLE : 0.5% to 5% (As per req.)
LOAD REGULATION :
+- 1%-3% (As per req.)
for 0-100% Load
FLOAT CHARGE : 2.35VPC( Adj.)
BOOST CHARGE : 2.45VPC( Adj.)
VOLTAGE STABILITY : +- 1%
INDICATION : MAINS ON, LOW, HIGH, CHARGING, CHARGE FULL
METERS : VOLTMETER AND AMPERE METER
SAFETY ARRANGEMENT : SHORT CIRCUIT PROTECTED BY CURRENT LIMIT.
( FUSES ALSO POROVIDED FOR EVERY STEPS ), MCCB FOR INPUT AND OUTPUT
OVER VOLTAGE AND UNDER VOLTAGE CUTOFF. BATTERY POLARITY PROTECTED
OVER LOAD PROTECTED BY CKT. BREAKER .
TERMINAL : OUTPUT TERMINALS FOR BATTERY AND LOAD.
NOISE LEVEL : TYPICALLY LESS THAN 65 dB AT 1 M
COOLING : NATURAL / FORCED COOLING
AMBIENT CONDITION : TEMPERATURE-00 ~ 550 C, HUMIDITY-95%
CASING : STEEL FRAMED AND IP SAFETY ARRANGEMENT PROVIDED
 
BATTERY CHARGER SERIES
Model VOLT
CAPACITY
AMP
CAPACITY
 
MODEL
VOLT
CAPACITY
AMP
CAPACITY
PCM0610 06V 10A PCM4810 48V 10A
PCM1210 12V 10A PCM4820 48V 20A
PCM1220 12V 20A PCM4850 48V 50A
PCM1250 12V 50A PCM4810 48V 100A
PCM12100 12V 100A PCM11010 110V 10A
PCM2410 24V 10A PCM11020 110V 20A
PCM2420 24V 20A PCM11050 110V 50A
PCM2450 24V 50A PCM110100 110V 100A
PCM24100 24V 100A PCM22010 220V 10A
PCM24200 24V 200A PCM22050 220V 50A
PCM24300 24V 300A PCM220100 220V 100A
 
 
True On-Line UPS PDF Print E-mail
Sunday, 10 May 2009 15:04
Introduction
PowerCom is now marketing and assembling U S based True On line UPS. Our
observation indicates that blackouts account for less than 5% of power disturbances. The
other 95% consist of surges, noise, sag and brownouts. These events can distrupt proper
operations of sensitive equipment decreasing productivity. Our True regenerative On-line
UPS provides highest level of protection against a broad spectrum of power problems. This
is accomplished through converting the incoming AC utility voltage to a regulated DC
voltage. From this DC voltage a new AC voltage is regenerated providing a clean, regulation
power source to your equipment. So, if your equipment operation is mission-critical, you
need a True-regenerative On-line UPS.
Applications
Computer And Computer Based
Sensitive Equipments
Medical Equipments
Laboratory Equipments
Telecommunication Equipments
Other Microprocessor Based Sensitive
Electrical And Electronic Equipments
 
Features
True Regenerative On-Line Design
On-Line Support (Management With Software
Optional)
Input Power Factor Correction
Microprocessor Control And Communications
Compact in Size, Light in weight
No Transformer Multi-Tap Switching Relays
LED/LCD Status Display
Status Indication(Dual Compartment)
Two State Battery Alarm
No Break Computer Grade Sine Wave Output
Wide Input Voltage Range
High Efficiency
Over crest Ratio Indicator
Generator Compatibility
Rs. 232 Communications
Site Wiring Fault Indiacator
Upsilon Monitoring Auto-Shutdown Software
Under Windows 2000 Server Optional
 
Technocal Specifications
 
 
<< Start < Prev 1 2 3 Next > End >>

Page 2 of 3

ISO 9001:2008

Products Gallery

  • Automatic Voltage Stabilizer (AVS)
  • Uninterruptible Power Supply (UPS)
  • Instant Power Supply (IPS)
  • True On-Line UPS
  • Automatic Battery Charger/Rectifier
  • Automatic Industrial Voltage Stabilizer
  • Network CCTV
  • Shielded Isolation Transformer
  • Electrical Sub Station Equipments